Sign Up

Sign In

Forgot Password

Lost your password? Please enter your email address. You will receive a link and will create a new password via email.

You must login to ask question.

Please briefly explain why you feel this question should be reported.

Please briefly explain why you feel this answer should be reported.

Please briefly explain why you feel this user should be reported.

How to Cut a Stringer?

The solution is simple – shorten the bottom riser cut on the stringer by the tread thickness. So, that cut where the stringer meets the bottom landing would be 5 ¼ inches from the tread above, while all the other risers would remain at 6 ¼ inches.

How to Cut a Stringer?

Cutting a stringer is a skill that any woodworker should have. Stringers are the structural members that are used to support stair treads, and they must be cut accurately to ensure the stairs are safe and secure. The following steps will help you cut a stringer correctly and safely.

Step 1: Measure and Mark

The first step to cutting a stringer is to measure and mark the wood. You will need to know the exact measurements of the stairs, which will include the width, rise, and tread. Measure the wood and mark it with a pencil. Use a straight edge to ensure the lines are straight and accurate.

Step 2: Set Up the Saw

Once the measurements are marked on the stringer, it is time to set up the saw. Place the stringer on a flat surface and attach a fence to the saw. This will guide the blade along the line as it cuts. The fence should be set so that the blade will cut along the line, but not too close, which could cause the blade to break.

Step 3: Cut the Stringer

When the saw is set up, it is time to cut the stringer. Make sure the blade is sharp and that it is aligned

Related Posts

Leave a comment