Sign Up

Sign In

Forgot Password

Lost your password? Please enter your email address. You will receive a link and will create a new password via email.

You must login to ask question.

Please briefly explain why you feel this question should be reported.

Please briefly explain why you feel this answer should be reported.

Please briefly explain why you feel this user should be reported.

How to Glue Concrete Back Together?

Clean it and the mating surface using a wire brush. Spread a heavy layer of loctite metal and concrete epoxy on the surfaces to be joined and press the broken piece into position, leaning a heavy block against the repair until the epoxy sets. Leave undisturbed for 24 hours.

How to Glue Concrete Back Together?

Gluing concrete back together is a quick and easy way to repair broken or cracked concrete. This can be especially useful if a concrete surface has become damaged and needs to be restored. The process of gluing concrete together is relatively simple, but it does require a few specific steps in order to ensure that the repair is successful. Here is a step-by-step guide on how to glue concrete back together.

The first step is to clean the surface of the concrete. This will help remove any dirt and debris that may be stuck to the surface. You can use a stiff-bristled brush to scrub the area. Once the surface is clean and dry, you can move on to the next step.

The next step is to apply a bonding agent to the concrete. This bonding agent will help to ensure that the concrete pieces are securely held together. You can purchase a bonding agent from most hardware stores. Once the bonding agent has been applied, allow it to dry for at least 24 hours.

After the bonding agent has dried, it is time to apply the adhesive. Make sure that you are using a concrete-specific adhesive for this task. Read the instructions on the label to ensure that you are using the correct

Related Posts

Leave a comment