Attach the hinge side of the frame to the concrete wall. Remove the middle screw from each hinge with a regular drill, and drill a pilot hole for longer 4-inch masonry screws that go through the frame and shims into the concrete wall. Use the hammer drill to make the hole, and then a regular drill to insert the screw.
How to Install a Door Frame into a Concrete Wall?
Installing a door frame into a concrete wall is not a difficult task, but it does require the appropriate tools and materials to ensure a properly installed frame. This guide will provide step-by-step instructions on how to install a door frame into a concrete wall.
The first step in installing a door frame into a concrete wall is to identify the type of frame you will be using. There are two main types of frames available; wood frames and steel frames. Depending on the type of frame you choose, the installation process may vary slightly.
Once you have selected the frame, you will need to measure the wall to determine the size of the frame you need. Measure from the floor to the top of the wall and from one side of the wall to the other. This will give you the width and height of the frame you need.
The next step is to prepare the concrete wall for the installation of the door frame. Start by cleaning the wall and then use a concrete grinder to remove any existing paint or sealant. Once the wall is clean, use a hammer drill to create holes in the wall where the frame will be placed. Make sure to use a hammer drill that is compatible with the size of the frame you are installing.
Leave a comment