You can use a reciprocating saw to cut loose the drywall from one side, then push the drywall loose at the opposite side. Knock out bearing wall studs with a sledgehammer. Alternately, you can cut the studs at the middle with a reciprocating saw and then pry out the ends with a pry bar.
How to Knock Out a Load Bearing Wall?
Removing a load bearing wall is a big job with serious consequences if done incorrectly. It requires a professional to do the work, as there are a few steps that need to be taken in order to ensure that the wall is structurally sound and safe for the home. In this article, we will discuss the steps that need to be taken in order to safely knock out a load bearing wall.
The first step is to identify whether or not the wall is actually load bearing. The easiest way to do this is to look for signs such as the wall running perpendicular to the joists in the roof or floor. If the wall is running in the same direction as the joists, then it is likely not load bearing. However, if the wall is running perpendicular to the joists, then it is likely load bearing. It is also important to note that even if the wall looks like it is not load bearing, it still might be, so it is best to consult a professional to make sure.
Once you have identified that the wall is load bearing, the next step is to determine the load bearing capacity of the wall. This can be done by having a professional come in and do a load bearing test. This will give you an idea of how much
Leave a comment