How to Make Foamed Concrete?

Foam concrete (fc) is made by mixing foam into mortar. The mortar is a cement mix with sand and water. As a result you end up with a mix that is lighter than “normal” concrete. The mass, or density as we call it here, (weight per cubic meter) depends on how much foam is added to the mortar.

How to Make Foamed Concrete?

Foamed concrete is an innovative building material that can be used for a variety of construction projects. It is lightweight, strong, and easy to use, and it is an excellent choice for projects that require a high level of insulation.

In this article, we will discuss how to make foamed concrete and the benefits of using it over traditional concrete. To make foamed concrete, you will need portland cement, sand, water, and an airentrainment agent.

The airentrainment agent helps create the foam bubbles in the concrete mix. Once all the ingredients have been combined, they must be mixed thoroughly in a large mixing container.

Once the mixture is ready, it should be poured into the desired form and allowed to set and cure. When using foamed concrete, it is important to use the right ratios of ingredients to ensure the desired results.

Typically, the mix should contain one part portland cement, two parts sand, and one part airentrainment agent. The ratio of water to the other ingredients should be about 1:1.5.

This ratio will vary depending on the desired strength of the concrete. Once the foamed concrete has been poured and cured, it can provide excellent insulation for a

Related Posts

Leave a comment