How to Lay a Wood Floor Over Concrete?

To ensure successful wood floor installation, you must place a moisture barrier between the concrete slab and flooring. Typically, the moisture barrier is a plastic sheet laid across the slab and taped at the seams with waterproof tape. This barrier will protect your floors from any moisture seeping in from the slab.

How to Lay a Wood Floor Over Concrete?

Laying a wood floor over concrete can be a difficult task, but it is possible if you take the time to prepare the concrete and use the proper materials. This article will provide a step-by-step guide on how to lay a wood floor over concrete, from selecting the appropriate wood flooring to finishing the job.

Step One: Prepare the Concrete

Before you can lay the wood floor, you need to prepare the concrete surface. First, check for moisture by taping a plastic sheet over the concrete for 24 hours and then checking for condensation on the underside of the plastic. If there is condensation, you need to seal the concrete floor with a concrete sealer.

Next, you need to make sure the concrete is level. Use a spirit level or a trowel to check the levelness of the concrete. If it is uneven, you can use a self-leveling compound to even out the surface.

Finally, you need to make sure the concrete is clean. Vacuum the entire surface to remove dust and debris. You can also use a degreaser to remove any oily residue.

Step Two: Choose the Right Wood Flooring

The next step is to choose